GM International D6030D SIL3 Switch/Proximity Relay-Out Repeater

$ 252,68

excl. 19% VAT , plus (National)

ACTIVE

Supply
Voltage	24 Vdc nom (18 to 30 Vdc), reverse polarity protected.
Current Consumption	35 mA @ 24 Vdc with short circuit input and relay energized, typical.
Power Dissipation	0.85 W @ 24 Vdc with short circuit input and relay energized, typical.
Input
Input switching current levels	ON ≥ 2.1 mA, OFF ≤ 1.2 mA.
Fault current levels	open fault ≤ 0.2 mA, short fault ≥ 6.8 mA
Input equivalent source	8 V 1 kΩ typical (8 V no load, 8 mA short).
Output
Type	Voltage free SPST relay contact.
Contact material	Ag Alloy (Cd free), gold plated.
Contact rating	4 A 250 Vac 1000 VA, 4 A 250 Vdc 120 W (resistive load).
Contact min. switching current	1 mA.
DC and AC load breaking capacity	refer to Instruction Manual.
Mechanical / electrical life	5 * 10⁶ / 3 * 10⁴ operation, typical.
Operate / release time	8 / 4 ms, typical.
Frequency response	10 Hz maximum.
Isolation
Test Voltage	In/Out 2.5 kV; In/Supply 2.5 kV; In/In 500 V; Out/Supply 2.5 kV; Out/Out 2.5 kV.
Environmental conditions
Operating temperature	temperature limits –40 to +70 °C.
Storage temperature	temperature limits –45 to +80 °C.
Mounting
Type	DIN-Rail 35 mm, with or without Power Bus.
Weight	about 140 g.
Connection	by polarized plug-in disconnect screw terminal blocks to accommodate terminations up to 2.5 mm² (13 AWG).
Dimensions	Width 12.5 mm, Depth 123 mm, Height 120 mm.