GM International D1010D-046 SIL 2 Repeater Power Supply Smart-HART® compatible DIN-Rail

GM International D1010D-046 SIL 2 Repeater Power Supply Smart-HART® compatible DIN-Rail

SKU: GMI20250007
Manufacturers: GM International

$ 650,12

excl. 19% VAT , plus (National)

Available immediately
Delivery time: 3 - 5 Workdays (Other countries)

Description

FEATURES

SIL2 /SC3
Input from Zone 0 (Zone 20), installation in Zone 2.
High Density, two channels per unit.
4-20 or 0-20 mA Input, Output Signal.
Wide Band Smart Communication, HART® compatible.
Input and Output short circuit proof.
High Accuracy.
Three port isolation, Input/Output/Supply.
EMC Compatibility to EN61000-6-2, EN61000-6-4, EN61326-1
In-field programmability by DIP Switch.
250 Vrms (Um) max. voltage allowed to the instruments associated with the barrier.

Technical Data

Supply
Type	24 Vdc nom (20 to 30 Vdc) reverse polarity protected, ripple within voltage limits ≤ 5 Vpp.
Current Consumption	115 mA @24V with 20 mA output typical.
Power Dissipation	1.9 W with 24 V supply voltage and 20 mA output typical.
Max. power consumption	3.7 W at 30 V supply voltage and short circuit condition
Input
Type	0/4 to 20 mA (separately powered input, voltage drop ≤ 0.9 V) or 4 to 20 mA (2 wire Tx current limited at ≈ 25 mA).
Transmitter line voltage	≥ 15.0 V at 20 mA with max. 20 mVrms ripple on 0.5 to 40 KHz frequency band.
Output
Type	0/4 to 20 mA, on max. 600 Ω load in source mode; V min. 5 V at 0 Ω load V max. 30 V in sink mode, current limited at ≈ 23 mA or 0/1 to 5 V on internal 250 Ω shunt (or 0/2 to 10 V on internal 500 Ω shunt on request).
Response time	50 ms (10 to 90 % step change).
Output ripple	≤ 20 mVrms on 250 Ω communication load on 0.5 to 40 KHz band.
Frequency response	0.5 to 40 KHz bidirectional within 3 dB (HART® and higher frequency protocols).
Performance
Ref. Conditions	24 V supply, 250 Ω load, 23 ± 1 °C ambient temperature.
Calibration accuracy	≤ ± 0.1 % of full scale.
Linearity error	≤ ± 0.05 % of full scale.
Supply voltage influence	≤ ± 0.05 % of full scale for a min to max supply change.
Load influence	≤ ± 0.05 % of full scale for a 0 to 100 % load resistance change.
Temperature influence	≤ ± 0.01 % on zero and span for a 1 °C change.
Isolation
Test Voltage	I.S. In/Out 1.5 KV; I.S. In/Supply 1.5 KV; I.S. In/I.S. In 500 V; Out/Supply 500 V; Out/Out 500 V.
Safety description
Equipment	Associated apparatus and non-sparking electrical equipment
Safety parameters	Uo/Voc = 26.3 V, Io/Isc = 91 mA, Po/Po = 597 mW at terminals 14-15, 10-11. Uo/Voc = 1.1 V, Io/Isc = 38 mA, Po/Po = 11 mW at terminals 15-16, 11-12. Ui/Vmax = 30 V, Ii/Imax = 104 mA, Ci = 1.05 nF, Li = 0 nH at terminals 15-16, 11-12. Um = 250 Vrms, -20 °C ≤ Ta ≤ 60 °C.
Environmental conditions
Operating temperature	temperature limits -20 to + 60 °C, relative humidity max 95 %.
Storage temperature	temperature limits -45 to + 80 °C.
Mounting
Type	EN/IEC60715 TH 35 DIN-Rail.
Weight	about 175 g
Connection	by polarized plug-in disconnect screw terminal blocks to accommodate terminations up to 2.5 mm².
Location	Safe Area/Non Hazardous Locations or Zone 2, Group IIC T4, Class I, Division 2, Groups A, B, C, D Temperature Code T4 and Class I, Zone 2, Group IIC, IIB, IIA T4 installation.
Protection class	IP 20.
Dimensions	Width 22.5 mm, Depth 99 mm, Height 114.5 mm.

Shipping weight:	0,50 kg
Item weight:	0,30 kg
Dimensions ( Length × Width × Height ):	16,00 × 14,00 × 14,00 cm
Zustand / Condition:	Neu / New

Product safety information

Manufacturer information:

G.M. International srl
Via G. Mameli 53-55
Monza e Brianza
Villasanta, Italien, 20852
info@gminternational.com
https://gminternational.com/