GM International D5040D I.S. SIL3 Loop-Powered Digital Output Driver

282,00 €

excl. 19% VAT , plus (National)

ACTIVE

Input
Type	Loop powered control signal.
Voltage	24 Vdc nom (18 to 30 Vdc), reverse polarity protected.
Current Consumption	45 mA @ 24 Vdc with 30 mA outputs, typical.
Power Dissipation	0.75 W @ 24 Vdc with 35 mA outputs, typical.
Output
Short circuit current	≥ 35 mA/channel; ≥ 70 mA two outputs in parallel
Response time	≤ 75 ms.
Output diagram	refer to Instruction Manual.
Isolation
Test Voltage	I.S. Out/In 1.5 kV; Out/Out 500 V; In/In 500 V.
Environmental conditions
Operating temperature	temperature limits –40 to +70 °C
Storage temperature	temperature limits –45 to +80 °C.
Safety description
Equipment	Associated apparatus and non-sparking electrical equipment.
Safety parameters	Uo = 25.2 V, Io = 146 mA, Po = 916 mW at terminals 7-8, 10-11. Uo = 25.2 V, Io = 108 mA, Po = 676 mW at terminals 7-9, 10-12. Refer to Instruction Manual for more details. Um = 250 Vrms or Vdc, -40 °C ≤ Ta ≤ 70 °C.
Mounting
Type	DIN-Rail 35 mm, or on custom Term. Board.
Weight	about 110 g.
Connection	by polarized plug-in disconnect screw terminal blocks to accomodate terminations up to 2.5 mm² (13 AWG).
Dimensions	Width 12.5 mm, Depth 123 mm, Height 120 mm.