GM International D1093S SIL 3 Relay Output Module with Line and Load diagnostics DIN-Rail Model D1093S

GM International D1093S SIL 3 Relay Output Module with Line and Load diagnostics DIN-Rail Model D1093S

SKU: GMI20250117
Manufacturers: GM International

336,00 €

excl. 19% VAT , plus (National)

Available immediately
Delivery time: 24 - 26 Workdays (Other countries)

Description

FEATURES

SIL2/SC3
Installation in Zone 2, Division 2.
Line and Load open diagnostic in NE and ND conditions.
DPST contact for NE load and 1 SPST contact for ND load.
5 A inrush current at 30 Vdc / 250 Vac.
Three port isolation, Input/Output/Supply.
EMC Compatibility to EN61000-6-2, EN61000-6-4, EN61326-1.

STATUS

PHASE-OUT

Next: SPARE-ONLY (2027-01-01)

ALTERNATIVE PRODUCT

D5096S

Technical Data

Supply
Voltage	24 Vdc nom (20 to 30 Vdc) reverse polarity protected, ripple within voltage limits ≤ 5 Vpp.
Current Consumption	25 mA typical.
Power Dissipation	0.6 W with 24 V supply voltage and fault relay energized, typical.
Max. power consumption	at 30 V supply voltage and fault relay energized, 0.9 W.
Input
Type	24 Vdc nom (20.4 to 27.6 Vdc) reverse polarity protected.
Current Consumption	50 mA with relay energized, typical.
Power Dissipation	1.2 W with 24 V input voltage and relay energized, typical.
Max. power consumption	at 27.6 V input voltage and relay energized, 1.5 W.
Output
Type	voltage free relay contact, normally open.
Contact material	Ag Alloy (Cd free).
Contact rating	3 A 250 Vac 750 VA, 3 A 125 Vdc 120 W (resistive load).
Contact inrush current	5 A at 30 Vdc, 250 Vac.
Contact min. switching current	10 mA.
DC Load breaking capacity	See Instruction Manual
Mechanical / electrical life	50 * 10⁶ / 1 * 10⁵ operation, typical.
Operate / release time	5 / 3 ms typical.
Bounce time NO / NC contact	3 ms.
Frequency response	10 Hz maximum.
Fault detection
De-energized fault signal	≤ 100 μA continuous (typical 65 μA).
De-energized open output detection	load resistance ≥ 350 KΩ (current ≤ 30 μA).
De-energized no fault detection	load resistance ≤ 250 KΩ
Energized open output detection	load current ≤ 10 mA (no fault detection ≥ 25 mA).
Fault signalling	voltage free NE SPST relay contact (output de-energized in fault condition).
Contact rating	3 A 250 Vac 750 VA, 3 A 125 Vdc 120 W (resistive load).
Response time	200 ms typical.
Isolation
Test Voltage	Output/Input 2.5 KV; Output/Supply 2.5 KV; Output/Fault Output 2.5 KV; Input/Supply 500 V; Input/Fault Output 500 V; Fault Output/Supply 500 V.
Storage	temperature limits –20 to + 60 °C, relative humidity max 95 %.
Environmental conditions
Operating	temperature limits –20 to + 60 °C, relative humidity max 95 %.
Storage	temperature limits - 45 to + 80 °C.
Connection	about 155 g.
Location	by polarized plug-in disconnect screw terminal blocks to accomodate terminations up to 2.5 mm².
Protection class	Safe Area/Non Hazardous Locations or Zone 2, Group IIC T4, Class I, Division 2, Groups A, B, C, D Temperature Code T4 and Class I, Zone 2, Group IIC, IIB, IIA T4 installation.
Dimensions	IP 20.
Mounting
Type	EN/IEC60715 TH 35 DIN-Rail.
Weight	about 155 g.
Connection	by polarized plug-in disconnect screw terminal blocks to accomodate terminations up to 2.5 mm².
Location	Safe Area/Non Hazardous Locations or Zone 2, Group IIC T4, Class I, Division 2, Groups A, B, C, D Temperature Code T4 and Class I, Zone 2, Group IIC, IIB, IIA T4 installation.
Protection class	IP 20.
Dimensions	Width 22.5 mm, Depth 99 mm, Height 114.5 mm.

Shipping weight:	0,50 kg
Item weight:	0,30 kg
Dimensions ( Length × Width × Height ):	16,00 × 14,00 × 14,00 cm
Zustand / Condition:	Neu / New

Product safety information

Manufacturer information:

G.M. International S.p.A
Via G. Mameli 53-55
Monza e Brianza
Villasanta, Italien, 20852
info@gminternational.com
https://gminternational.com/

GM International D1093S SIL 3 Relay Output Module with Line and Load diagnostics DIN-Rail Model D1093S

Supply

Input

Output

Fault detection

Isolation

Environmental conditions

Mounting