Payment methods

PayPal Apple Pay Klarna Mastercard Visa American Express

GM International D6263S SIL2 Load Cell/Strain Gauge Bridge Repeater

$ 565,70

excl. 19% VAT , plus

ACTIVE

Supply
Type	24 Vdc nom (18 to 30 Vdc), reverse polarity protected.
Current Consumption	75 mA @ 24 Vdc with four 350 Ω load cells connected, typical.
Power Dissipation	1.8 W @ 24 Vdc with four 350 Ω load cells connected, typical.
Input
Type	Up to four 350 Ω load cells in parallel or up to five 450 Ω load cells in parallel or up to ten 1000 Ω load cells in parallel.
Integration time	12.5 ms.
Bridge supply voltage	4.0 Vdc nominal.
Bridge output signal	1 to 4 mV/V.
Output
Type	Same as the input signal.
Output impedance	500 Ω, typical.
Excitation voltage	externally applied between 4 V and 15 V.
Transfer characteristic	linear.
Response time	≤ 20 ms (10 to 90 % step change).
Performance
Ref. Conditions	24 V supply, 23 ± 1 °C ambient temperature.
Calibration accuracy	≤ ± 0.003 % input FSR, after system calibration.
Linearity accuracy	≤ ± 0.002 % input FSR.
Short fault	≤ ± 0.002 % input FSR for a 1 °C change.
Isolation
Test Voltage	In/Out 2.5 kV; In/Supply 2.5 kV; Out/Supply 500 V.
Environmental conditions
Operating temperature	temperature limits –40 to +70 °C.
Storage temperature	temperature limits –45 to +80 °C.
Mounting
Type	DIN-Rail 35 mm, with or without Power Bus.
Weight	about 165 g.
Connection	by polarized plug-in disconnect screw terminal blocks to accommodate terminations up to 2.5 mm² (13 AWG).
Dimensions	Width 22.5 mm, Depth 123 mm, Height 120 mm.

Item information	Value
Shipping weight:	0,50 kg
Item weight:	0,30 kg
Dimensions ( Length × Width × Height ):	16,00 × 14,00 × 14,00 cm
Zustand / Condition:	Neu / New

Product safety information

Manufacturer information:

G.M. International S.p.A
Via G. Mameli 53-55
Monza e Brianza
Villasanta, Italien, 20852
info@gminternational.com
https://gminternational.com/