GM International D5240T I.S. SIL2 Bus-Powered Digital Output Driver

GM International D5240T I.S. SIL2 Bus-Powered Digital Output Driver

SKU: GMI20250210
Manufacturers: GM International

456,00 €

excl. 19% VAT , plus (National)

Available immediately
Delivery time: 24 - 26 Workdays (Other countries)

Description

FEATURES

SIL 2 / SC 3
Output to Zone 0
Installation in Zone 2
Bus powered for NE loads
Output short circuit proof
Modbus RTU RS-485 for monitor & configuration
Fully programmable operating parameters
Three port isolation, Input/Output/Supply
High Density, three channels per unit
STATUS

ACTIVE

CHANNELS

3

Technical Data

Supply
Type	24 Vdc nom (21.5 to 30 Vdc), reverse polarity protected.
Current Consumption	175 mA @ 24 Vdc with 35 mA output (all three outputs active), typical.
Power Dissipation	2.7 W @ 24 Vdc with 35 mA output C (all three outputs active), typical.
Input
Type	Logic level reverse polarity protected.
Voltage range	0 V ≤ OFF ≤ 5 V, 18 V ≤ ON ≤ 30 V.
Current Consumption	13.45 mA @ 24 Vdc, typical.
Output diagram
Type	refer to Instruction Manual.
Short circuit current	≥ 35 mA/channel.
Response time	≤ 15 ms.
Modbus interface
Type	Modbus RTU RS-485 up to 115.2 kbps for monitor/configuration/control.
Isolation
Test Voltage	I.S. Out/In 1.5 kV; I.S. Out/Supply 1.5 kV; Out/Modbus 1.5 kV; In/Supply 500 V; In/In 500 V; In/Modbus 500V.
Environmental conditions
Operating temperature	temperature limits –40 to +70 °C.
Storage temperature	temperature limits –45 to +80 °C.
Safety description
Equipment	Associated apparatus and non-sparking electrical equipment.
Safety parameters	Uo = 25.2 V, Io = 146 mA, Po = 916 mW at terminals 13-14, 17-18, 21-22. Uo = 25.2 V, Io = 108 mA, Po = 676 mW at terminals 13-15, 17-19, 21-23. Uo = 25.2 V, Io = 93 mA, Po = 580 mW at terminals 13-16, 17-20, 21-24. Refer to Instruction Manual for more details. Um = 250 Vrms or Vdc, -40 °C ≤ Ta ≤ 70 °C.
Mounting
Type	DIN-Rail 35 mm, with or without Power Bus or on custom Term. Board.
Weight	about 175 g.
Connection	by polarized plug-in disconnect screw terminal blocks to accomodate terminations up to 2.5 mm² (13 AWG).
Dimensions	Width 22.5 mm, Depth 123 mm, Height 120 mm.