GM International D5090S SIL3 Relay Out Module for 5 A NE Loads

GM International D5090S SIL3 Relay Out Module for 5 A NE Loads

SKU: GMI20250180
Manufacturers: GM International

148,00 €

excl. 19% VAT , plus (National)

Available immediately
Delivery time: 24 - 26 Workdays (Other countries)

Description

FEATURES

SIL 3 / SC 3 for NE loads with NE driver
Installation in Zone 2/Div. 2
Up to 5 A functional / 6 A inrush current
Load disconnection on both supply lines available
Compatible with DCS/PLC pulse testing
Service contact available
Input/Output isolation

STATUS

ACTIVE

CHANNELS

View datasets

Technical Data

Input
Type	24 Vdc nom (21.6 to 27.6 Vdc), reverse polarity protected. Relay coils are internally protected with suppressor diodes.
Current Consumption	45 mA @ 24 Vdc, typical.
Power Dissipation	1.1 W @ 24 Vdc, typical.
Output
Type	1 voltage free SPDT relay contact identified with outputs: Out 1 (NO contact) terminals 13-21 and Service Load Out (NC contact) terminals 13-15; 1 voltage free SPST relay contact identified with output Out 2 (NO contact) terminals 14-22. Terminals 13-21 (Out 1) and 14-22 (Out 2) are open when relay is de-energized, closed in energized relay condition. Service load output (not SIL) at terminals 13-15 is normally close when relay is de-energized, open in energized relay condition.
Contact material	Ag Alloy (Cd free), gold plated.
Contact rating	5 A 250 Vac 1250 VA, 5 A 250 Vdc 140 W (resistive load).
Contact min. switching current	1 mA.
Contact inrush current	6 A @ 24 Vdc, 250 Vac.
DC and AC load breaking capacity	refer to Instruction Manual.
Mechanical / electrical life	5 * 10⁶ / 3 * 10⁴ operation, typical.
Operate / release time	55 / 30 ms, typical.
Isolation
Test Voltage	Input / All Outs 2.5 kV; Out 1/Out 2 500V.
Environmental conditions
Operating temperature	temperature limits -40 to +70 °C.
Storage temperature	temperature limits -45 to +80 °C.
Mounting
Type	DIN-Rail 35 mm, or on custom Term. Board.
Weight	about 125 g.
Connection	by polarized plug-in disconnect screw terminal blocks to accommodate terminations up to 2.5 mm² (13 AWG).
Dimensions	Width 12.5 mm, Depth 123 mm, Height 120 mm.