GM International D1020S SIL 2 Powered Isolating Driver Smart-HART® compatible DIN-Rail

GM International D1020S SIL 2 Powered Isolating Driver Smart-HART® compatible DIN-Rail

Artikelnummer: GMI20250028
Hersteller: GM International

286,00 €

exkl. 19% USt. , zzgl. (National)

Sofort verfügbar
Lieferzeit: 3 - 5 Werktage (Ausland)

Beschreibung

FEATURES

SIL2 /SC3
Output to Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2.
4-20 or 0-20 mA Input, Output Signal.
Wide Band Smart Communication, HART® compatible.
Field open circuit detection.
High Accuracy.
Three port isolation, Input/Output/Supply.
EMC Compatibility to EN61000-6-2, EN61000-6-4, EN61326-1
250 Vrms (Um) max. voltage allowed to the instruments associated with the barrier.

Technical Data

Supply
Voltage	24 Vdc nom (20 to 30 Vdc) reverse polarity protected, ripple within voltage limits ≤ 5 Vpp.
Current Consumption	50 mA with 20 mA output typical
Power Dissipation	1.0 W with 24 V supply voltage and 20 mA output typical
Max. power consumption	at 30 V supply voltage and overload condition, 1.4 W
Input
Type	0/4 to 20 mA with ≤ 2.0 V voltage drop, reverse polarity protected.
Output
Type	0/4 to 20 mA, on max. 750 Ω load, current limited at ≈ 23 mA.
Response time	50 ms (10 to 90 % step change).
Output ripple	≤ 20 mVrms on 250 Ω communication load on 0.5 to 40 KHz band
Frequency response	0.5 to 40 KHz bidirectional within 3 dB (HART® and higher frequency protocols).
Performance
Type	Ref. Conditions 24 V supply, 250 Ω load, 23 ± 1 °C ambient temperature.
Calibration accuracy	≤ ± 0.1 % of full scale.
Linearity error	≤ ± 0.05 % of full scale.
Supply voltage influence	≤ ± 0.05 % of full scale for a min to max supply change.
Load influence	≤ ± 0.05 % of full scale for a 0 to 100 % load resistance change.
Temperature influence	≤ ± 0.01 % on zero and span for a 1 °C change.
Isolation
Test Voltage	I.S. Out/In 1.5 KV; I.S. Out/Supply 1.5 KV; I.S. Out/I.S. Out 500 V; In/Supply 500 V; In/In 500 V.
Environmental conditions
Operating	temperature limits -20 to + 60 °C, relative humidity max 95 %.
Storage	temperature limits – 45 to + 80 °C.
Safety description
Safety parameters	Uo/Voc = 25.2 V, Io/Isc = 87 mA, Po/Po = 548 mW at terminals 14-15, 10-11. Um = 250 Vrms, -20 °C ≤ Ta ≤ 60 °C.
Mounting
Type	EN/IEC60715 TH 35 DIN-Rail.
Weight	about 120 g
Connection	by polarized plug-in disconnect screw terminal blocks to accomodate terminations up to 2.5 mm².
Location	Safe Area/Non Hazardous Locations or Zone 2, Group IIC T4, Class I, Division 2, Groups A, B, C, D Temperature Code T4 and Class I, Zone 2, Group IIC, IIB, IIA T4 installation.
Protection class	IP 20.
Dimensions	Width 22.5 mm, Depth 99 mm, Height 114.5 mm.

Versandgewicht:	0,50 kg
Artikelgewicht:	0,30 kg
Abmessungen ( Länge × Breite × Höhe ):	16,00 × 14,00 × 14,00 cm
Zustand / Condition:	Neu / New

Angaben zur Produktsicherheit

Herstellerinformationen:

G.M. International srl
Via G. Mameli 53-55
Monza e Brianza
Villasanta, Italien, 20852
info@gminternational.com
https://gminternational.com/

GM International D1020S SIL 2 Powered Isolating Driver Smart-HART® compatible DIN-Rail

Supply

Input

Output

Performance

Isolation

Environmental conditions

Safety description

Mounting