| range |
TeSys |
| product name |
TeSys D |
| product or component type |
Reversing contactor |
| device short name |
LC2D |
| contactor application |
Motor control
Resistive load |
| utilisation category |
AC-3
AC-1 |
| device presentation |
Preassembled with reversing power busbar |
| poles description |
3P |
| power pole contact composition |
3 NO |
| [Ue] rated operational voltage |
Power circuit: <= 1000 V AC 25...400 Hz |
| [Ie] rated operational current |
65 A (at <60 °C) at <= 440 V AC AC-3 for power circuit
80 A (at <40 °C) at <= 440 V AC AC-1 for power circuit |
| motor power kW |
18.5 kW at 220...230 V AC 50 Hz
30 kW at 380...400 V AC 50 Hz
37 kW at 500 V AC 50 Hz
37 kW at 660...690 V AC 50 Hz
37 kW at 440 V AC 50 Hz
37 kW at 415 V AC 50 Hz |
| motor power HP (UL / CSA) |
5 hp at 115 V AC 60 Hz for 1 phase motors
20 hp at 200/208 V AC 60 Hz for 3 phases motors
50 hp at 575...600 V AC 60 Hz for 3 phases motors
50 hp at 460...480 V AC 60 Hz for 3 phases motors
20 hp at 220...240 V AC 60 Hz for 3 phases motors
10 hp at 230...240 V AC 60 Hz for 1 phase motors |
| control circuit type |
AC at 50/60 Hz |
| [Uc] control circuit voltage |
230 V AC 50/60 Hz |
| auxiliary contact composition |
1 NO + 1 NC |
| [Uimp] rated impulse withstand voltage |
8 kV conforming to IEC 60947 |
| overvoltage category |
III |
| [Ith] conventional free air thermal current |
10 A (at 60 °C) for signalling circuit |
| Irms rated making capacity |
140 A AC for signalling circuit conforming to IEC 60947-5-1
250 A DC for signalling circuit conforming to IEC 60947-5-1
1000 A at 440 V for power circuit conforming to IEC 60947-4 |
| rated breaking capacity |
1000 A at 220/415/440 V for power circuit conforming to IEC 60947
1000 A at 500 V conforming to IEC 60947
630 A at 690 V conforming to IEC 60947 |
| [Icw] rated short-time withstand current |
100 A - 1 s for signalling circuit
120 A - 500 ms for signalling circuit
140 A - 100 ms for signalling circuit
520 A 40 °C - 10 s for power circuit
900 A 40 °C - 1 s for power circuit
110 A 40 °C - 10 min for power circuit
260 A 40 °C - 1 min for power circuit |
| associated fuse rating |
10 A gG for signalling circuit conforming to IEC 60947-5-1 |
| average impedance |
1 mOhm - Ith 80 A 50 Hz for power circuit |
| [Ui] rated insulation voltage |
Power circuit: 600 V CSA certified
Power circuit: 600 V UL certified
Signalling circuit: 690 V conforming to IEC 60947-1
Signalling circuit: 600 V CSA certified
Signalling circuit: 600 V UL certified
Power circuit: 1000 V conforming to IEC 60947-4-1 |
| electrical durability |
1.4 Mcycles 80 A AC-1 at Ue <= 440 V
1.5 Mcycles 65 A AC-3 at Ue <= 440 V |
| power dissipation per pole |
6.4 W AC-1
4.2 W AC-3 |
| Front cover |
With |
| interlocking type |
Mechanical |
| mounting support |
Rail
Plate |
| standards |
CSA C22.2 No 14
EN 60947-4-1
EN 60947-5-1
IEC 60947-4-1
IEC 60947-5-1
UL 508 |
| product certifications |
BV
CCC
CSA
DNV
GL
RINA
UL
EAC |
| connections - terminals |
Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable end
Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable end
Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible with cable end
Control circuit: screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable end
Control circuit: screw clamp terminals 1 cable(s) 1…4 mm²solid without cable end
Control circuit: screw clamp terminals 2 cable(s) 1…4 mm²solid without cable end
Power circuit: screw clamp terminals 1 cable(s) 2.5…25 mm²flexible without cable end
Power circuit: screw clamp terminals 2 cable(s) 2.5…16 mm²flexible without cable end
Power circuit: screw clamp terminals 1 cable(s) 2.5…25 mm²flexible with cable end
Power circuit: screw clamp terminals 2 cable(s) 2.5…10 mm²flexible with cable end
Power circuit: screw clamp terminals 1 cable(s) 2.5…25 mm²solid without cable end
Power circuit: screw clamp terminals 2 cable(s) 2.5…16 mm²solid without cable end |
| tightening torque |
Control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm
Control circuit: 1.7 N.m - on screw clamp terminals - with screwdriver Philips No 2
Power circuit: 5 N.m - on screw clamp terminals - with screwdriver flat Ø 8 mm
Power circuit: 5 N.m - on screw clamp terminals |
| operating time |
20...26 ms closing
8...12 ms opening |
| safety reliability level |
B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1
B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 |
| mechanical durability |
16000000 cycles |
| maximum operating rate |
3600 cyc/h 55 °C |
| Shipping weight: |
4,50 kg
|
| Item weight: |
3,30 kg
|
| Dimensions
( Length × Width × Height ):
|
25,00 × 20,00 × 20,00 cm |
| Zustand / Condition: |
Ungebraucht in OVP / Unused in box |
Product safety information
Manufacturer information:
Schneider Electric GmbH
Gothaer 29
Nordrhein-Westfalen
Ratingen, Deutschland, 40880
de-schneider-service@se.com
https://www.se.com
Important Notice!
Our items are generally not new. They come from inventory liquidations and dismantlings.
Please note that for items where no age information is provided in the description, it should be assumed that they have been stored for a very long time, possibly several years. This can affect the quality and durability of technical items. Please consider this before making a purchase.
German