GM International D6212Q SIL2 2/4-Wire Transmitter Power Supply

GM International D6212Q SIL2 2/4-Wire Transmitter Power Supply

SKU: GMI20250293
Category: GMI
Manufacturers: GM International

$ 486,36

excl. 19% VAT , plus (National)

Available immediately
Delivery time: 17 - 19 Workdays (Other countries)

Description

FEATURES

SIL 2 / SC 3
0/4-20 mA Active-Passive Input, Source Output
Duplication/inversion/scaling output
Input operations (sum, dif, max, min) available
Input and Output short circuit proof
Out of range fault detection
Alarm output with user-settable trip points
Modbus RTU RS-485 for monitor & configuration
Fully programmable operating parameters
High Accuracy, µP controlled A/D converter
Three port isolation, Input / Output / Supply
High Density, four channels per unit

STATUS

ACTIVE

Technical Data

Supply
Type	24 Vdc nom (21.5 to 30 Vdc), reverse polarity protected.
Current Consumption	200 mA @ 24 Vdc with 20 mA in/out, typical.
Power Dissipation	2.75 W @ 24 Vdc with 20 mA in/out, typical.
Input
Type	0/4 to 20 mA (2 wire Tx current limited ≈ 25 mA) or separately powered inputs (only for channels 1 and 2).
Transmitter line voltage	14.5 V typical, 14.0 V minimum, @ 20 mA.
Integration time	500 ms.
Output
Type	0/4 to 20 mA, on max. 300 Ω load source mode, current limited ≈ 25 mA.
Response time	100 ms (10 to 90 % step change).
Alarm
Trip point range	within rated limits of the input sensor.
ON-OFF delay time	0 to 1000 s, 100 ms step.
Hysteresis	within rated limits of input sensor.
Output	voltage free SPST photoMOS: 100 mA, 60 Vdc (≤ 1 V voltage drop).
Modbus interface
Type	Modbus RTU RS-485 up to 57.6 kbps for monitor/configuration/control.
Input performance
Ref. Conditions	24 V supply, 250 Ω loads, 23 ± 1 °C ambient temperature.
Calibration accuracy	≤ ± 0.05 % FSR
Linearity accuracy	≤ ± 0.05 % FSR
Temp. influence	≤ ± 0.01% of input FSR for a 1 °C change
Analog output performance
Ref. Conditions	24 V supply, 250 Ω loads, 23 ± 1 °C ambient temperature.
Calibration accuracy	≤ ± 0.05 % FSR
Linearity accuracy	≤ ± 0.05 % FSR
Temp. influence	≤ ± 0.005 % of output FSR for a 1 °C change
Isolation
Test Voltage	In/Out 1.5 kV; In/Supply 1.5 kV; Out/Supply 500 V; In/Alarm 1.5 kV; Supply/Alarm 500 V; Out/Alarm 500 V.
Mounting
Type	DIN-Rail 35 mm, with or without Power Bus or on custom Term. Board.
Weight	about 120 g.
Connection	by polarized plug-in disconnect screw terminal blocks to accomodate terminations up to 2.5 mm² (13 AWG).
Dimensions	Width 22.5 mm, Depth 123 mm, Height 120 mm.