FEATURES
- SIL 2 / SC 3
- 0 to –20 V Input/Output Signal
- Wide band signal transfer
- Input and Output short circuit proof
- In-field programmability by DIP Switch
- High Accuracy
- Three port isolation, Input/Output/Supply
STATUS
Technical Data
Supply
|
| Voltage |
24 Vdc nom (18 to 30 Vdc), reverse polarity protected. |
| Current Consumption |
90 mA @ 24 Vdc with 20 mA transducer consumption and 2 mA output load, typical. |
| Power Dissipation |
2.0 W @ 24 Vdc with 20 mA transducer consumption and 2 mA output load, typical. |
Input
|
| Type |
0 V to -20 V (10 kΩ impedance at terminals 7-8 or 8-9). |
| 3 wires sensor supply voltage |
more than -22 V @ 0 mA supply, more than -17 V @ 15 mA supply (current limited @ ≈ 23 mA). |
| 2 wires sensor supply voltage |
more than -17 V with constant current supply. |
| 2 wires sensor supply current |
selectable @ 4 mA, 6 mA or 10 mA via internal DIP–Switch. |
Output
|
| Type |
0 to -20 V on 10 kΩ load, with 10 Ω output resistance. |
| Response time |
≤ 10 µs (10 to 90 % step change). |
| Frequency response |
DC to 20 kHz within 1 dB maximum. |
Performance
|
| Ref. Conditions |
24 V supply, 10 kΩ load, 23 ± 1 °C ambient temperature |
| Calibration accuracy |
≤ ± 0.1 % FSR |
| Linearity accuracy |
≤ ± 0.05 % FSR |
| Temp. influence |
≤ ± 0.005 % on zero/span for a 1 °C change. |
Isolation
|
| Test Voltage |
In/Out 1.5 kV; In/Supply 1.5 kV; Out/Supply 500 V. |
Environmental conditions
|
| Operating temperature |
temperature limits –40 to +70 °C |
| Storage temperature |
temperature limits –45 to +80 °C |
Mounting
|
| Type |
DIN-Rail 35 mm, with or without Power Bus or on custom Term. Board. |
| Weight |
about 125 g. |
| Connection |
by polarized plug-in disconnect screw terminal blocks to accomodate terminations up to 2.5 mm² (13 AWG). |
| Dimensions |
Width 12.5 mm, Depth 123 mm, Height 120 mm. |
| Shipping weight: |
0,50 kg
|
| Item weight: |
0,30 kg
|
| Dimensions
( Length × Width × Height ):
|
16,00 × 14,00 × 14,00 cm |
| Zustand / Condition: |
Neu / New |
Product safety information
Manufacturer information:
G.M. International S.p.A
Via G. Mameli 53-55
Monza e Brianza
Villasanta, Italien, 20852
info@gminternational.com
https://gminternational.com/
German