GM International D5290S-080 SIL3 115 Vac Relay Out Module for 10 A NE Loads

140,00 €

exkl. 19% USt. , zzgl. (National)

ACTIVE

Input
Type	115 Vac nom (95 to 130 Vac).
Current Consumption	25 mA @ 115 Vac, typical.
Power Dissipation	2.5 W @ 115 Vac, typical.
Output
Type	1 voltage free SPDT relay contact identified with outputs: Out 1 (NO contact) terminals 13-21 and Service Load Out (NC contact) terminals 13-15; 1 voltage free SPST relay contact identified with output Out 2 (NO contact) terminals 14-22. Terminals 13-21 (Out 1) and 14-22 (Out 2) are open when relay is de-energized, closed in energized relay condition. Service load output (not SIL) at terminals 13-15 is normally close when relay is de-energized, open in energized relay condition.
Contact material	Ag Alloy (Cd free).
Contact rating	10 A 250 Vac 2500 VA, 10 A 250 Vdc 300 W (resistive load).
Contact inrush current	16 A @ 24 Vdc, 250 Vac.
Contact min. switching current	100 mA.
DC and AC load breaking capacity	refer to Instruction Manual.
Mechanical / electrical life	5 * 10⁶ / 5 * 10⁴ operation, typical.
Operate / release time	12 ms / 4 ms, typical.
Isolation
Test Voltage	Input/All Outs 2.5 kV; Out 1/Out 2 500 V.
Environmental conditions
Operating temperature	temperature limits -40 to +60 °C.
Storage temperature	temperature limits -45 to +80 °C.
Mounting
Type	DIN-Rail 35 mm.
Weight	about 165 g.
Connection	by polarized plug-in disconnect screw terminal blocks to accommodate terminations up to 2.5 mm² (13 AWG).
Dimensions	Width 22.5 mm, Depth 123 mm, Height 120 mm.