GM International D1130D SIL 2 Switch/Proximity Detector Repeater Relay Output DIN-Rail

GM International D1130D SIL 2 Switch/Proximity Detector Repeater Relay Output DIN-Rail

Artikelnummer: GMI20250119
Hersteller: GM International

230,00 €

exkl. 19% USt. , zzgl. (National)

Sofort verfügbar
Lieferzeit: 24 - 26 Werktage (Ausland)

Beschreibung

FEATURES

SIL2/SC2
Input from Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2.
Universal AC supply voltage (85 to 250 Vac, 48 to 400 Hz).
NO/NC contact/proximity Detector Input.
Two SPDT Relay Output Signals.
SPDT Relay Output for fault detection on single channel version.
Three port isolation, Input/Output/Supply.
EMC Compatibility to EN61000-6-2, EN61000-6-4, EN61326-1.
In-field programmability by DIP Switch.
High Density, two channels per unit.
250 Vrms (Um) max. voltage allowed to the Instruments associated with the barrier.

STATUS

ACTIVE

CHANNELS

Technical Data

Supply
Voltage	115-230 Vac, 50-60 Hz nom (85 to 250 Vac, 48 to 400 Hz), ripple within voltage limits ≤ 10 Vpp, 500 mA time lag fuse and 275 Vrms transient voltage surge suppressor protected. Limit supply voltage to 250 Vrms for Instrinsic Safety applications.
Current consumption @ 115 Vac	25 mA with short input and relays energized.
Current consumption @ 230 Vac	15 mA with short input and relays energized.
Max. power consumption	at 264 Vac supply voltage, short circuit input and relays energized, 2.0 W
Input switching current levels
Type	ON ≥ 2.1 mA, OFF ≤ 1.2 mA, switch current ≈ 1.65 mA ± 0.2 mA hysteresis.
Fault current levels	open fault ≤ 0.2 mA, short fault ≥ 6.8 mA (when enabled both faults actuate fault relay)
Input equivalent source	8 V 1 KΩ typical (8 V no load, 8 mA short circuit).
Output
Type	voltage free SPDT relay contact.
Contact material	AgCdO.
Contact rating	2 A 250 Vac 500 VA, 2 A 250 Vdc 80 W (resistive load).
DC Load breaking capacity	See Instruction manual
Mechanical / electrical life	30 * 10⁶ / 1 * 10⁵ operation, typical.
Operate / release time	7 / 3 ms typical.
Bounce time NO / NC contact	3 / 5 ms.
Response time	20 ms.
Frequency response	10 Hz maximum.
Isolation
Test Voltage	I.S. In/Out 2.5 KV; I.S. In/Supply 2.5 KV; Out/Supply 2.5 KV; Out/Out 2.5 KV.
Storage	temperature limits -20 to + 60 °C, relative humidity max 90 % non condensing, up to 35 °C.
Environmental conditions
Operating	temperature limits -20 to + 60 °C, relative humidity max 90 % non condensing, up to 35 °C.
Storage	temperature limits – 45 to + 80 °C.
Safety description
Safety parameters	Uo/Voc = 10.7 V, Io/Isc = 15 mA, Po/Po = 39 mW at terminals 13-14, 15-16. Um = 250 Vrms, -20 °C ≤ Ta ≤ 60 °C.
Weight	EN/IEC60715 TH 35 DIN-Rail.
Connection	about 145 g D1130D, 140 g D1130S.
Location	by polarized plug-in disconnect screw terminal blocks to accomodate terminations up to 2.5 mm².
Protection class	Safe Area/Non Hazardous Locations or Zone 2, Group IIC T4, Class I, Division 2, Groups A, B, C, D Temperature Code T4 and Class I, Zone 2, Group IIC, IIB, IIA T4 installation.
Dimensions	IP 20
Mounting
Type	EN/IEC60715 TH 35 DIN-Rail.
Weight	about 145 g
Connection	by polarized plug-in disconnect screw terminal blocks to accomodate terminations up to 2.5 mm².
Location	Safe Area/Non Hazardous Locations or Zone 2, Group IIC T4, Class I, Division 2, Groups A, B, C, D Temperature Code T4 and Class I, Zone 2, Group IIC, IIB, IIA T4 installation.
Protection class	IP 20
Dimensions	Width 22.5 mm, Depth 99 mm, Height 114.5 mm.

Versandgewicht:	0,50 kg
Artikelgewicht:	0,30 kg
Abmessungen ( Länge × Breite × Höhe ):	16,00 × 14,00 × 14,00 cm
Zustand / Condition:	Neu / New

Angaben zur Produktsicherheit

Herstellerinformationen:

G.M. International S.p.A
Via G. Mameli 53-55
Monza e Brianza
Villasanta, Italien, 20852
info@gminternational.com
https://gminternational.com/