FEATURES
- SIL3/SC3
- Installation in Zone 2, Division 2
- 2 fully independent channels.
- 1 SPST NO contact and 1 SPST NC contact for each channel.
- 5 A inrush current at 30 Vdc / 250 Vac.
- Input/Output isolation.
- EMC Compatibility to EN61000-6-2, EN61000-6-4, EN61326-1.
- High Density, two channels per unit.
STATUS
PHASE-OUT
Next: SPARE-ONLY (2027-01-01)
ALTERNATIVE PRODUCT
Technical Data
Input
|
| Voltage |
24 Vdc nom (20.4 to 27.6 Vdc) reverse polarity protected, ripple within voltage limits ≤ 5 Vpp. |
| Current Consumption |
50 mA for each channel with relay energized, typical (100 mA for 2 channels D1092D-069 when used as duplicator 1 input / 2 outputs). |
| Power Dissipation |
1.2 W for each channel with 24 V input voltage and relay energized, typical (2.4 W for 2 channels D1092D-069 when used as duplicator). |
| Max. power consumption |
at 27.6 V input voltage and relay energized, 1.5 W for each channel (3.0 W for 2 channels D1092D-069 when used as duplicator). |
Output
|
| Type |
voltage free SPST NO+SPST NC relay contact. |
| Contact material |
Ag Alloy (Cd free). |
| Contact rating |
3 A 250 Vac 750 VA, 3 A 125 Vdc 120 W (resistive load). |
| Contact inrush current |
5 A at 30 Vdc, 250 Vac. |
| Contact min. switching current |
10 mA. |
| DC Load breaking capacity |
See instruction Manual. |
| Mechanical / electrical life |
50 * 106 / 1 * 105 operation, typical. |
| Operate / release time |
5 / 3 ms typical. |
| Bounce time NO / NC contact |
3 ms. |
| Frequency response |
10 Hz maximum. |
Isolation
|
| Test Voltage |
Input/Output 2.5 KV; Input/Input 500 V; Output/Output 2.5 KV; Output A/Output B 1.5 KV. |
Environmental conditions
|
| Operating |
temperature limits -20 to + 60 °C, relative humidity max 95 %. |
| Storage |
temperature limits -45 to + 80 °C. |
Mounting
|
| Type |
EN/IEC60715 TH 35 DIN-Rail. |
| Weight |
about 145 g |
| Connection |
by polarized plug-in disconnect screw terminal blocks to accomodate terminations up to 2.5 mm2. |
| Location |
Safe Area/Non Hazardous Locations or Zone 2, Group IIC T4, Class I, Division 2, Groups A, B, C, D Temperature Code T4 and Class I, Zone 2, Group IIC, IIB, IIA T4 installation. |
| Protection class |
IP 20. |
| Dimensions |
Width 22.5 mm, Depth 99 mm, Height 114.5 mm. |
| Item information |
Value |
| Shipping weight: |
0,50 kg
|
| Item weight: |
0,30 kg
|
| Dimensions
( Length × Width × Height ):
|
16,00 × 14,00 × 14,00 cm |
| Zustand / Condition: |
Neu / New |
Product safety information
Manufacturer information:
G.M. International S.p.A
Via G. Mameli 53-55
Monza e Brianza
Villasanta, Italien, 20852
info@gminternational.com
https://gminternational.com/
German