GM International D1032Q SIL 2 Switch/Proximity Detector Repeater Relay Output DIN-Rail

GM International D1032Q SIL 2 Switch/Proximity Detector Repeater Relay Output DIN-Rail

SKU: GMI20250043
Manufacturers: GM International

$ 406,55

excl. 19% VAT , plus (National)

Available immediately
Delivery time: 3 - 5 Workdays (Other countries)

Description

FEATURES

SIL2 /SC3
Input from Zone 0 (Zone 20), Division 1, installation in Zone 2, Division 2.
High Density, four channels per unit.
NO/NC contact/proximity Detector Input.
Four voltage free SPST Relay contact Output Signals.
Relay Output for fault detection on dual channel version.
Line fault detection with common signalling available when using Power Bus enclosure.
Three port isolation, Input/Output/Supply.
EMC Compatibility to EN61000-6-2, EN61000-6-4, EN1326-1
In-field programmability by DIP Switch.
250 Vrms (Um) max. voltage allowed to the instruments associated with the barrier.

Technical Data

Supply
Voltage	24 Vdc nom (20 to 30 Vdc) reverse polarity protected, ripple within voltage limits ≤ 5 Vpp.
Current Consumption	75 mA with input closed and relays energized.
Power Dissipation	1.8 W with 24 V supply voltage, input closed and relays energized.
Max. power consumption	at 30 V supply voltage, short circuit input and relays energized, 2.4 W
Input
Type	ON ≥ 2.1 mA, OFF ≤ 1.2 mA, switch current ≈ 1.65 mA ± 0.2 mA hysteresis.
Fault current levels	open fault ≤ 0.2 mA, short fault ≥ 6.8 mA (when enabled both faults de-energize channel relay with quad channel unit D1032Q or actuate fault relay with dual channel unit D1032D).
Input equivalent source	8 V 1 KΩ typical (8 V no load, 8 mA short circuit).
Output
Type	voltage free SPST relay contact.
Contact material	AgNi90/10.
Contact rating	2 A 250 Vac 500 VA, 2 A 250 Vdc 80 W (resistive load)
Mechanical / electrical life	15 * 10⁶ / 1 * 10⁵ operation, typical.
Operate / release time	5 / 2 ms typical
Bounce time NO / NC contact	1 / 5 ms
Response time	20 ms.
Frequency response	10 Hz maximum.
Isolation
Test Voltage	I.S. In/Out 1.5 KV; I.S. In/Supply 1.5 KV; I.S. In/I.S. In 500 V; Out/Supply 1.5 KV; Out 1-3/Out 2-4 1.5 KV.
Environmental conditions
Operating	temperature limits -20 to + 60 °C, relative humidity max 95 %.
Storage	temperature limits -45 to + 80 °C.
Safety description
Safety parameters	Uo/Voc = 9.6 V, Io/Isc = 10 mA, Po/Po = 24 mW at terminals13-14, 15-16, 9-10, 11-12. Um = 250 Vrms, -20 °C ≤ Ta ≤ 60 °C.
Mounting
Type	EN/IEC60715 TH 35 DIN-Rail.
Weight	about 185 g
Connection	by polarized plug-in disconnect screw terminal blocks to accomodate terminations up to 2.5 mm².
Location	Safe Area/Non Hazardous Locations or Zone 2, Group IIC T4, Class I, Division 2, Groups A, B, C, D Temperature Code T4 and Class I, Zone 2, Group IIC, IIB, IIA T4 installation. Class I, Division 2, Groups A, B, C, D Temperature Code T4 and Class I, Zone 2, Group IIC, IIB, IIA T4 installation.
Protection class	IP 20.
Dimensions	Width 22.5 mm, Depth 99 mm, Height 114.5 mm.

Shipping weight:	0,50 kg
Item weight:	0,30 kg
Dimensions ( Length × Width × Height ):	16,00 × 14,00 × 14,00 cm
Zustand / Condition:	Neu / New

Product safety information

Manufacturer information:

G.M. International srl
Via G. Mameli 53-55
Monza e Brianza
Villasanta, Italien, 20852
info@gminternational.com
https://gminternational.com/

GM International D1032Q SIL 2 Switch/Proximity Detector Repeater Relay Output DIN-Rail

Supply

Input

Output

Isolation

Environmental conditions

Safety description

Mounting