GM International D6017SS-TB SIL3 3/4-Wire HART® Transmitter Power Supply

$ 294,16

exkl. 19% USt. , zzgl. (National)

ACTIVE

Supply
Voltage	24 Vdc nom (18 to 30 Vdc), reverse polarity protected.
Current Consumption	270 mA @ 24 Vdc with 200 mA supply and 20 mA output signal on 250 Ω, typical.
Power Dissipation	1.75 W @ 24 Vdc with 200 mA supply and 20 mA output signal on 250 Ω, typical.
Input
Type	4 to 20 mA (voltage drop ≤ 6 V), reading range 0 to 24 mA.
Transmitter line voltage	24 V nominal, 23 V minimum @ 200 mA.
Current rating	200 mA (resettable fuse protected), with linear derating down to 150 mA, from 50 to 70°C.
HART Impedance	225 Ω, typical.
Output
Input switching current levels	4 to 20 mA, limited at 25 mA.
Sink out voltage range	2 to 30 V.
Conventional Tx load	0 to 550 Ω.
Smart Tx load	250 Ω nom (150 to 500 Ω).
Response time	10 ms (10 to 90 % step change).
Performance
Ref. Conditions	24 V supply, 250 Ω load, 23 ± 1 °C ambient temperature.
Calibration accuracy	≤ ± 20 µA.
Linearity accuracy	≤ ± 20 µA.
Temp. influence	≤ ± 2 µA/°C.
Isolation
Type	Supply/In 500 V; Supply/Out 500 V; In/Out 500 V; Field Supply/In 500 V; Field Supply/Out 500 V; Field Supply/Supply 500 V.
Environmental conditions
Operating temperature	temperature limits –40 to +70 °C.
Storage temperature	temperature limits –45 to +80 °C.
Mounting
Type	Custom Term. Board.
Weight	about 155 g.
Connection	by polarized plug-in disconnect screw terminal blocks to accommodate terminations up to 2.5 mm² (13 AWG).
Dimensions	Width 12.5 mm, Depth 123 mm, Height 120 mm.

Versandgewicht:	0,50 kg
Artikelgewicht:	0,30 kg
Abmessungen ( Länge × Breite × Höhe ):	16,00 × 14,00 × 14,00 cm
Zustand / Condition:	Neu / New

Angaben zur Produktsicherheit

Herstellerinformationen:

G.M. International S.p.A
Via G. Mameli 53-55
Monza e Brianza
Villasanta, Italien, 20852
info@gminternational.com
https://gminternational.com/